2022 Land Pride RC2515 Base
- Year 2022
- Make Land Pride
- Model RC2515
2022 Land Pride RC2515 Base
2022 Land Pride RC2515
Land Pride's RC2515, a 15' version of our popular 12' medium-duty Rotary Cutter, is an economical solution for general grass cutting needs. The Land Pride gearboxes feature a 1-5/8" output shaft and stout lower bearings. The gearboxes are driven by a constant velocity Cat. 4 main driveline and Cat. 3 connecting drivelines with slip-clutch protection on all three.
Features may include:
GEARBOX WARRANTY- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.
- All three connecting drivelines offer two-plate slip clutch protection.
- Deck-mounted spring cushion provides a smooth ride in rough terrain.
- 10 Gauge smooth top deck reduces accumulation of debris and is easier and faster to clean.
- Wings are leveled with easy-to-access and easy-to adjust turnbuckles.
Engine
Engine Power
Tractor: 50-100 hp (37-75 kW) | Gearbox: Splitter - 160 hp (119 kW) / Center & wings - 100 hp (75 kW)
Lubrication
Gearbox: Splitter - gear lube 80-90W EP / Center & wings - gear lube 80-90W EP
Drivetrain
Driveline
Input: ASAE Category 4 with constant velocity u-joint | Intermediate & wing: ASAE Category 3 with slip-clutch
Wheels & Tires
Wheels
29" Used aircraft tires or 21" laminated wheels | Number of wheels: 4 or 6 Total
Operational
Operating Speed
Blade tip speed at 540 rpm: Center blades & wing blades = 14,963 fpm (76 mps)
Chassis
Hitch/Type
Pull-type hitch & clevis
Lights and Safety
Safety Features
Wing transport protection: Wing transport locks
Dimensions
Dimensions
Gearbox shafts: Input shaft - 1 3/8" 6 Spline / Output shaft - 1 5/8" | Cutting capacity: 1 1/2" (3.8 cm) | Wing flex: Max. 20° down, can float up as needed as long as the wheel(s) are still on the ground. | Deck material: 10 Gauge (3.4 mm) deck | Side skirt material: 1/4" (6 mm) Plate | Blades - 6 (2 per deck): 1/2" x 4" (13 mm x 10.2 cm) | Blade overlap: 6" (15 cm) | Stump jumper / blade holder: 10 Gauge (3.4 mm) round dish shaped pan, reinforced with 1" x 4" (2.5 cm x 10.2 cm) blade bar | Lift hydraulics: 2 1/2" | Lift hydraulics: 8"
Cutting Width
15' - 0" (4.57 m)
Overall Width
15' - 7" (4.75 m)
Transport Width
Normal: 10' - 2 1/2" (3.11 m) With transport locks set and cutter blade 13" (33 cm) off the ground. | Minimum: 8' - 4" (2.54 m) With transport locks set and cutter blade 2" (5 cm) off the ground
Overall Length
15' - 2" (4.62 m) With laminated tires / 15' - 5 1/2" (4.71 m) With aircraft tires
Deck Height
11 1/4" (29 cm)
Height
Cutting: 2" to 13" (5 cm to 33 cm)
Bore
Wing folding hydraulics: 8"
Stroke
Wing folding hydraulics: 10"
Capacities
Oil capacity
Gearbox: Splitter - 4.5 pints (2.13 L) / Center & wings - 5.75 Pints (2.72 L)
Features
Hitch jack: 2,000 lbs (907 kg)
Weights
Weight
Hitch: 1,022 lb (464 kg) | Machine: 3,202 lbs. with chain guards & four laminated tires. |
Lighting
Signal lights: LED | 7 Pin connector: SAE J560 pin configuration
Features
Features
Lift hydraulics: Hydraulic cylinder, hoses, fittings & stroke control spacers | Wing folding hydraulics: Hydraulic cylinders, hoses & fittings | Skid shoes: Wing deck - 1 replaceable per wing / Center deck - 2 replaceable shoes | Blade rotation: left wing - Clockwise / center deck/right wing: Counterclockwise | Blades - 6 (2 per deck): Heat treated free swinging alloy Steel with up lift | Blade bolt: Keyed with hardened flat washer & locknut | Front & rear guards: Single chain or rubber | Transport axle: Spring-cushioned lift cylinder
Hub Type
Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" shafts.