2022 Land Pride RCR15 Series RCR1548
- Year 2022
- Make Land Pride
- Model RCR15 Series
2022 Land Pride RCR15 Series RCR1548
For small acreage owners looking for a heavier cutter, Land Pride offers the RCR1548. It features a 2" cutting capacity, a high blade tip speed, and larger gearbox than the RCR12. Ideal for maintenance of lanes, pastures, and other rough-cut areas.
Features may include:
QUICK-HITCH COMPATIBLE- Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.
- These cutters offers 2" cutting capacity. See Operator's Manual for more information.
- Allows cutter to slide over obstructions protecting the gearbox output shaft.
- Heavy-duty 1-1/4" spindle on the tailwheel gives strength to protect the tailwheel assembly.
- 5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.
- Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.
- Round back design helps discharge grass better than enclosed or partially enclosed cutters. The fully welded deck adds additional strength.
Engine
Engine Power
Recommended tractor: 20-60 hp (15-45 kw) | Gearbox rating: 65 hp (37.3 kw)
Lubrication
Gearbox: gear lube 80-90w EP
Drivetrain
Driveline
ASAE Category 3
Gearbox
with speed up beveled gears: 540 input rpm gearbox 1:1.93
Wheels & Tires
Wheels
Tailwheel: 4" x 16" Solid rubber tire
Operational
Operating Speed
Power take-off: 540 rpm | Blade tip: 13,090 fpm (66.5 mps)
Chassis
Hitch/Type
Category 1 & Category 1 limited, Quick Hitch ready
Lights and Safety
Safety Features
Driveline protection: 1/2" (13 mm) center shearbolt protection
Dimensions
Dimensions
Cutting capacity: 2" (5.1 cm) (Grass, weeds & light brush) | Deck material thickness: 12 Gauge (2.7 mm) | Skids shoes: 1/4" X 2" (6 mm x 5.1 cm) Weld-on | Stump jumper: Round pan 10 ga. x 24" (61.0 cm) | Blades (2): 1/2" x 3" (1.3 cm x 7.6 cm)
Cutting Width
47 1/2" (1.21 m)
Overall Width
53 1/2" (1.36 m)
Overall Length
(including tailwheel): 91 3/4" (2.33 m)
Deck Height
(Bottom of deck to bottom of skid shoe): 7 1/4" (18.4 cm)
Height
Cutting: 1 3/4" - 11 1/2" (4.4 cm - 29.2 cm)
Capacities
Oil capacity
Gearbox: 4.5 Pints (2.13 L)
Weights
Weight
Implement (with front guard): 424 lbs (192.3 kg)
Features
Features
Blade bolts: Keyed with harden flat washer and locknut
Construction Material
Blades (2): Heat treated alloy steel Free-swinging blades | Gearbox: Cast iron housing
Construction Material, Deck
One piece reinforced deck